Brother MFC L2710DW Fax Setup

 Here is the procedure to send a fax on the Brother MFC L2710DW printer.

1. Power on the Brother MFC L2710DW printer and wait until it initializes.
2. Connect the telephone line to the Brother printer and the telephone at the appropriate ports.
3. Go to the Brother MFC 2710DW printer's control panel and look for the Fax icon. It is the icon that resembles a printer with a portion of the paper on top.
4. Place the original document to be faxed face up in the ADF. It is recommended that you place documents in the ADF when faxing multiple pages. If you want to fax a single page, place it face down on the Brother printer's scanner glass.
5. Type the fax number on the Brother MFC L2710DW printer by using the dial pad on the control panel. Press the 'Start' button to begin scanning the document. After the document is scanned, it is automatically sent to the number you entered.
6. Follow these steps when faxing a multiple page document from the scanner glass. Tap the up arrow button to highlight Yes. Load the next page on the scanner glass. Tap OK. After the last page is scanned by the Brother printer, tap the down arrow button to highlight No and then press OK. Tap the Stop/Exit button to stop sending the fax.
7. You can follow these guidelines to send a fax manually from the Brother MFC l2710dw Setup.
8. Press the Fax button on the Brother MFC L2710DW printer and load the document.
9. Tap the Hook button and wait until you hear a dial tone. Now, enter the fax number you need to call. Press the Start button only after you hear the fax tone. You will need to press the up arrow button if you use the scanner glass.