Brother Mfc J5845dw Scan Setup

Pull out the paper tray below the control panel of the printer.

Remove the cover from the Brother Mfc J5845dw scan setup tray.

The Brother printer can perform two different types of scans.

  • The photo scan
  • The paper scan

The photo scan has three different sizes,

  • (3.5”x5”)(9x13)
  • (4”x6”)(10x15)
  • (5”x7”)(13x18)

The photo stopper comes with three different sizes for each.

It is the photo stopper 1, Photo stopper L, and the photo stopper 2L.

Slide the paper guide for each of these sizes.

To perform a routine scan, load as many as 20 papers in the paper tray area of the tray with the printing surface facing down.

Loading more than the maximum number of sheets may lead to paper jams.

Adjust the paper guides along the edges of the sheets to fit the paper correctly.

Thing is set up, refer to the following steps to set up your Brother MFC J5845dw to scan.

Place the top cover the tray and close it.

Slide the paper tray completely into the printer until it fixes appropriately.

Slide-out the paper support from the tray so that the scanned documents or photos can be loaded.

If the paper size is larger than A4, load the papers into the multi-purpose tray.

Pull out the paper tray using both hands until it fixes into place.

Slide the paper guides to match the paper’s width you are using.

If you slide the paper guides too tightly on Brother Mfc J5845dw scan setup, this may lead to paper folds and paper jams.

Flip the stack of papers a couple of times before loading it into the multi-purpose tray to avoid any paper jams.

If the paper is of A4 size or smaller than that, draw the paper support right below the paper tray until it locks into place.

Use the support flap from the paper tray if the size is more than A4.

The paper’s size can be changed in the settings menu available on the printer’s control panel.

Now that the paper loading for Brother MFC J5845dw scan Setup.

Location: United States

Comments

Post a Comment

Popular posts from this blog

Brother Hl 2040 Duplex Printing

Image
  Here are the Brother HL 2040 Duplex printing guidelines when the user uses the paper tray. Open the document that is to be printed and click Print. Choose the Advanced tab and then click Manual Duplex. Go to the Basic tab and then set the Paper Source to either Auto Select or Tray 1. The printer prints the even-numbered pages. Take these sheets out of the output tray and arrange them in the paper tray with the blank side facing down. Read the prompts on the computer screen and follow them to allow the printer to print the odd-numbered pages.  When using the manual feed slot for Brother HL 2040 setup duplex printing, the user can follow these steps. The manufacturer that you do not use thick paper in the feed slot. Go to the Advanced tab after clicking the Print option. Select the Manual Duplex option and then choose Manual feed as the Paper Source. Insert the paper sheets into the Brother printer carefully by using both hands. Make sure to keep the print side facing up when ...
Read more

Install Brother Printer HL-L2390DW

 How to Setup Brother HL-L2390DW Printer? After getting the Brother HL-L2390DW printer from the manufacturer, check if the printer box is sealed properly. Unseal the printer box and ensure the printer components are enclosed with it. Take the printer from the box and locate it on a plane surface. Remove the protective tapes on the printer. Unpack the drum unit provided in the printer package. Remove the protective material from the drum unit. Insert the drum unit into the printer. Link the power cable to the corresponding port of the Brother HL-L2390DW setup printer and power supply. Turn on the printer by force pressing its power button. Install Brother Printer HL-L2390DW software on your computer and complete the setup.
Read more

Brother HL l2395dw Installation

 First, unpack the printer from the printer package by opening the seal of the package. Check if the drum unit and toner cartridge, replacement toner cartridge, telephone cord, and quick Brother HL L2395DW installation and setup guide are present inside the box. Next, remove all the packing materials that are available around the printer. Insert the drum unit and toner cartridge assembly in the Brother HL-L2395DW printer. Retract the input tray of the Brother 2395DW printer and load it with enough paper. Power on the HL-L2395DW printer by connecting it to the power supply using a power cord. Choose the language of your choice in the next step. Set up the print functions of the Brother HL-L2395DW printer and take a test print.
Read more