Brother HL l2390dw Wireless Setup

 To set up your Brother HL L2390DW printer on a wireless network, perform the instructions given below.

Before you begin the connection setup, note down your Wireless router’s SSID and password.

You can find it at the back and rear of the Wi-Fi router.

Now, turn on your Brother HL L2390DW printer, and navigate to the Menu or Settings section.

Choose the Network option followed by WLAN.

Select the Brother HL L2390dw Setup Wizard option in the WLAN section.

Check if the WLAN option is enabled.

If not, enable it. Now your Brother printer will look for the available wireless networks.

Choose your Wi-Fi network from the list, enter the SSID & password of it when prompted, and press the OK button.

Now your Brother HL L2390DW printer is connected to the wireless network successfully.

On your Windows or Mac system, start installing the Brother HL L2390DW printer driver.

After the Driver Brother HL L2390dw setup and installation, try to perform a test print, scan, or copy operation.

Location: United States

Comments

Post a Comment

Popular posts from this blog

Brother Hl 2040 Duplex Printing

Image
  Here are the Brother HL 2040 Duplex printing guidelines when the user uses the paper tray. Open the document that is to be printed and click Print. Choose the Advanced tab and then click Manual Duplex. Go to the Basic tab and then set the Paper Source to either Auto Select or Tray 1. The printer prints the even-numbered pages. Take these sheets out of the output tray and arrange them in the paper tray with the blank side facing down. Read the prompts on the computer screen and follow them to allow the printer to print the odd-numbered pages.  When using the manual feed slot for Brother HL 2040 setup duplex printing, the user can follow these steps. The manufacturer that you do not use thick paper in the feed slot. Go to the Advanced tab after clicking the Print option. Select the Manual Duplex option and then choose Manual feed as the Paper Source. Insert the paper sheets into the Brother printer carefully by using both hands. Make sure to keep the print side facing up when ...
Read more

Install Brother Printer HL-L2390DW

 How to Setup Brother HL-L2390DW Printer? After getting the Brother HL-L2390DW printer from the manufacturer, check if the printer box is sealed properly. Unseal the printer box and ensure the printer components are enclosed with it. Take the printer from the box and locate it on a plane surface. Remove the protective tapes on the printer. Unpack the drum unit provided in the printer package. Remove the protective material from the drum unit. Insert the drum unit into the printer. Link the power cable to the corresponding port of the Brother HL-L2390DW setup printer and power supply. Turn on the printer by force pressing its power button. Install Brother Printer HL-L2390DW software on your computer and complete the setup.
Read more

Brother HL l2395dw Installation

 First, unpack the printer from the printer package by opening the seal of the package. Check if the drum unit and toner cartridge, replacement toner cartridge, telephone cord, and quick Brother HL L2395DW installation and setup guide are present inside the box. Next, remove all the packing materials that are available around the printer. Insert the drum unit and toner cartridge assembly in the Brother HL-L2395DW printer. Retract the input tray of the Brother 2395DW printer and load it with enough paper. Power on the HL-L2395DW printer by connecting it to the power supply using a power cord. Choose the language of your choice in the next step. Set up the print functions of the Brother HL-L2395DW printer and take a test print.
Read more